Camlock Forming System

Gates camlock is a light commercial, hand-set forming system.  The Cam-lock bracket engages the self-centering loop tie, securely holding the 2×4 waler into place.

The Gates camlock forming system uses common forming materials like 2×4 walers and 3/4″ plywood.  It requires no special hardware and cuts the use of stiff backs and walers in half.

Category: , , , , , , , , . Tags: , , , , .

Product Description

Benefits include:

  • 2250# safe working load (with 2:1 safety factor)
  • Camlocks eliminate the need for long and short end ties by utilizing one standard end length
  • Great for radius forming
  • A smooth, uniform results after brealback, allowing easier grouting and faster, better finishing
  • The cone is designed to allow for slight variation in plywood or 2 x 4 in thickness
  • All gates ties are manufactured to very rigid standards to assure consistency in size, strength and break back quality. Construction audit.

Downloads

Gates Camlock Forming System Brochure

Gates Commercial Forming Brochure