Dayton/Richmond D-12 Rod Clamps are available for use with .225" through .500" smooth or deformed rod to tie various types of concrete forms. Rod clamps are especially useful on battered and curved wall applications.

Dayton/Richmond D-12 Rod Clamps are cast malleable iron clamps used with smooth or deformed 1/4", 3/8" and 1/2" rod to tie forms. The rod is clamped securely by a bolt or nut/bolt combination. Nail holes are provided to affix the clamp to the wales. For an additional safety measure, Dayton/Richmond recommends bending the rod approximately 90˚ behind the clamp

Product Documentation:
D-12 Rod Clamps

Dayton/Richmond D-12-A Pencil Rod is available in .225" and .375" mild steel smooth rod for use with the rod clamps shown below. Pencil rod is available in rolls or straightened and cut to length.

Dayton/Richmond D-12-A Pencil Rod is available in 0.225" and 0.375" mild steel smooth rod for use with Dayton/Richmond
Rod Clamps. Pencil Rod is available in 600 feet coils or straightened and cut to length.

Product Documentation:
D-12-A Pencil Rod