C-24 Pres-Steel Half Hanger

Dayton/Richmond C-24 Pres-Steel Half Hangers are designed to be field welded to a steel bridge beam or to bridge beam rebar stirrups and provide one-sided forming support.
Product Documentation:
C-24 45° Pres-Steel Half Hangers

C-24 Pres-Steel Precast Half Hanger
Dayton/Richmond C-24 Pres-Steel Half Hangers are designed to be field welded to a steel bridge beam or to bridge beam rebar stirrups and provide one-sided forming support.
Product Documentation:
C-24 45° Pres-Steel Precast Half Hanger

C-25 Adjustable Half Hanger
Dayton/Richmond C-25 Adjustable Half Hanger attaches to a bridge beam stirrup and is designed to support one-sided forming on applications where welding is not an option.
Product Documentation:
C-25 45° Adjustable Half Hanger

C-26 Pres-Steel Half Hanger
Product Documentation:
C-26 45° Pres-Steel Half Hanger

C-41 Coil Rod Hanger
Dayton/Richmond C-41 Coil Rod Hanger is designed to support interior forming on both sides of a bridge beam and to breakback inside the concrete. The C-41 Coil Rod Hanger can be used effectively with any haunch height condition.
Product Documentation:
C-41 45° Coil Rod Hanger

C-60 Pres-Steel Hanger
Dayton/Richmond C-60 Pres-Steel Hanger, Type 1 permits installation and adjustment from above the deck. C-60 Pres-Steel Hanger, Type 1 has a nominal 3/8" setback and is used to support deck formwork on interior bridge beams.

Dayton/Richmond C-60 Pres-Steel Hangers, Type 2 and Type 7 are similar to Type 1 hanger except Type 2 and Type 7 hangers provide for 1" to 1-1/2" haunch conditions, respectively.

Dayton/Richmond C-60 Pres-Steel Hangers, Type 4 are used on steel interior bridge beams to support deck formwork. The hanger's end sections extend over the edge of the beam to resist shifting.
Product Documentation:
C-60 45° Pres-Steel Hanger-Type 1-A
C-60 45° Pres-Steel Hanger-Type 2-A
C-60 45° Pres-Steel Hanger-Type 4-A, 5-A and 9-A
C-60 45° Pres-Steel Hanger-Type 7-A
C-60 45° Pres-Steel Hanger-Type 8-A

C-62 Pres-Steel Hanger
Dayton/Richmond C-62 Pres-Steel Hanger is designed with a 45° end section at one end and is used to support fascia overhang formwork. Haunch heights up to 2-3/4" can be accomodated.
Product Documentation:
C-62 45° Pres-Steel Hanger

C-63 Pres-Steel Hanger
Product Documentation:
C-63 45° Pres-Steel Hanger-Type 4-AB and Type 5-AB

C-64 Pres-Steel Hanger
Product Documentation:
C-64 45° Pres-Steel Hanger-Type 4-A, 4-AN and Type 5-AN

C-68 Ty-Down Hanger
Product Documentation:
C-68 45° Ty-Down Hangers

D-1-LA Hook Bolt
Product Documentation:
D-1-LA Hook Bolt

C-24 Pres-Steel Half Hanger
Dayton/Richmond C-24 Pres-Steel Half Hangers are designed to be field welded to a steel bridge beam or to bridge beam rebar stirrups and provide one-sided forming support.
Product Documentation:
C-24 90° and 15° Pres-Steel Half Hangers
Additional Information:
C-24 90° and 15° Pres-Steel Half Hanger Selection Chart

C-24 Pres-Steel Precast Half Hanger
Dayton/Richmond C-24 Pres-Steel Half Hangers are designed to be field welded to a steel bridge beam or to bridge beam rebar stirrups and provide one-sided forming support.
Product Documentation:
C-24 90° Pres-Steel Precast Half Hangers, Type 1-PR and Type 4-PR
Additional Information:
C-24 90° and 15° Pres-Steel Half Hanger Selection Chart

C-25 Pres-Steel Adjustable Half Hanger
Dayton/Richmond C-25 Adjustable Half Hanger attaches to a bridge beam stirrup and is designed to support one-sided forming on applications where welding is not an option.
Product Documentation:
C-25 90° Pres-Steel Adjustable Half Hanger

C-26 Pres-Steel Half Hanger
Product Documentation:
C-26 90° and 15° Pres-Steel Half Hangers

C-28 Haunch Carrier
Product Documentation:
C-28 Haunch Carrier

C-29 Fillet Clip
Product Documentation:
C-29 Fillet Clip

C-41 Coil Rod Hanger
Dayton/Richmond C-41 Coil Rod Hanger is designed to support interior forming on both sides of a bridge beam and to breakback inside the concrete. The C-41 Coil Rod Hanger can be used effectively with any haunch height condition.
Product Documentation:
C-41 Coil Rod Hanger

C-44 Con-Beam Hanger
Product Documentation:
C-44 and C-45 Con-Beam Hangers

C-45 Con-Beam Hanger
Product Documentation:
C-44 and C-45 Con-Beam Hangers

C-46 Con-Beam Hanger
Product Documentation:
C-46 Con-Beam Hanger

C-46-H Offset Free-Fit Half Hanger
Product Documentation:
C-46-H and C-46-TH Offset Free-Fit Half Hangers

C-46-TH Offset Free-Fit Half Hanger
Product Documentation:
C-46-H and C-46-TH Offset Free-Fit Half Hangers

C-47 Con-Beam Hanger
Product Documentation:
C-47 Con-Beam Hanger

C-60 Pres-Steel Hanger
Dayton/Richmond C-60 Pres-Steel Hanger, Type 1 permits installation and adjustment from above the deck. C-60 Pres-Steel Hanger, Type 1 has a nominal 3/8" setback and is used to support deck formwork on interior bridge beams.

Dayton/Richmond C-60 Pres-Steel Hangers, Type 2 and Type 7 are similar to Type 1 hanger except Type 2 and Type 7 hangers provide for 1" to 1-1/2" haunch conditions, respectively.

Dayton/Richmond C-60 Pres-Steel Hangers, Type 4 are used on steel interior bridge beams to support deck formwork. The hanger's end sections extend over the edge of the beam to resist shifting.
Product Documentation:
C-60 Pres-Steel Hanger - Type 1
C-60 Pres-Steel Hanger - Type 2
C-60 Pres-Steel Hanger - Type 3
C-60 Pres-Steel Hanger - Type 4
C-60 Pres-Steel Hanger - Type 5
C-60 Pres-Steel Hanger - Type 7
C-60 Pres-Steel Hanger - Type 8

C-63 Pres-Steel Hook Hanger
Product Documentation:
C-63 Pres-Steel Hook Hanger, Type 1-B and Type 2-B

C-65 Adjustable Joist Hanger
Dayton/Richmond C-65 Adjustable Joist Hanger is available in two sizes that accept 2X and 4X joist material. The Adjustable Joist Hanger can be used on concrete beams, steel girders and box culverts. It is adjustable and completely reusable.
Product Documentation:
C-65 Adjustable Joist Hanger
Additional Information:
C-65 Adjustable Joist Hanger Typical Applications
C-65 and Adjustable Joist Hanger Spacing Chart