ABOUT US
 
 
 
 
Caraustar Waxed Paper Columns
 
   
Available Sizes
      6" X 10' 8"X 10' 10" X 10'
    12" X 10' 14" X 10' 16" X 10'
    18" X 10' 20" X 10' 22" X 10'
    24" X 10' 30" X 10' 36" X 10'
         
    42" X 12' 48" X 12'  
         
         
         
         
         
     
     
Molded Fiberglass Columns
 
     
     
     
Steel Columns
 
     
     

Heavy Duty Steel Column forms develop an exceptionally smooth, hard surface remarkably free of voids and with a minimum number of indistinct seams.

  • All standard column diameters from 14" to 60".
  • Standard column lengths are 8'-0, 4'-0, 2'-0, and 1'-0.
  • Steel Forms for Sale or Lease
  • You can eliminate form inventory and keep working capital available by leasing Deslauriers Heavy Duty forms when needed.
  • FORM DESIGN 3000 PSF ON FORMS THROUGH 36" DIAMETER OR 2000 PSF ON FORMS OVER 36" DIAMETER
The forms are galvanized constant radius steel half round sections and quarter round sections (for forms over 48" in diameter) bolted into units for crane handling on the job site. Each component is framed with flange angles diecut and punched for accurate flush butt joints without protusion on the contact surface. Vertical and horizontal seams, opened and closed with each pour, are connected with high speed bolts to speed setting and stripping. Curing time permitting, one column per form can be produced each working day.


steel column
     
Available Sizes
12" X 2' 12" X 8' 20" X 1' 20" X 2'
20" X 4' 20" X 8' 30" X 1' 30" X 12'
30" X 2' 30" X 4' 30" X 8' 36" X 1'
36" X 2' 36" X 4' 36" X 8' 42" X 21'
42" X 6' 48" X 2' 48" X 4' 60" X 8'
60" X 16' 72" X 4'    
       
     
     
     
Symons Steelply Columns
 
     
   

Steel-Ply Column
The Steel-Ply Forming System provides several ways to form columns of various shapes and sizes. Outside Corners and panels or fillers can be combined to form square or rectangular columns. This method proves faster and more accurate than job-built forms. Wedge Bolt connections help square corners and speed assembly and stripping.

 

Column Hinge
The Column Hinge is used to set and strip Steel-Ply column forms more efficiently. Column formwork can be handled as a single unit that is "closed" around reinforcing steel and "opened" after concrete is placed.

The Column Hinge makes forming crews very productive when there are repetitive column designs in commercial and industrial structures.

 

Quick Column Hardware
The Quick Column Hardware is used in combination with the Column Hinge for even faster column forming. The hardware attaches to the Steel-Ply Outside Corner opposite the Column Hinge to provide a fast closure and release.

With this method, there is no loose hardware to consider during the column forming sequence. Everything remains connected to the column formwork for maximum productivity.

l

   
   
   
Bigfoot Columns Bases
 
   

Construction projects keep getting larger and larger to accommodate our needs. The structures are also getting heavier because of the types of materials now use maintenance free, plastic lumbers, etc.

Today’s builders and homeowners are also facing greater challenges because footing codes haven’t evolved with the new types of construction. In fact, for decks alone, most North American codes allow decks to carry a heavier load than the building itself!

The dangers caused by uplift and the lack of properly installed or appropriate footings should not be overlooked. Numerous insurance claims have been filed due to problems with footings. It only takes a few hours to install a proper footing and the benefit is substantially increased safety to the structure.

Quality engineering, optimum structural stability, safety and convenience, make our products the leading engineered footing form available on the market.

Bigfoot Systems® Footing Forms are not only environmentally friendly, but they can be installed easily in a single day. This eliminates the hassle of building traditional wooden box forms which takes three days.

Not only do they beat the traditional wooden box method, they beat any square-shaped footing hands-down!

  • Its advantage rests with its shape: a bell-shaped footing with a round base.

Bigfoot works with the natural laws of physics to provide an even distribution of weight that secures the footing to the earth --- something a square shape cannot do.

Doug Steadman, PEng, Texas, USA, says: "The bell footing was developed through trial and error and proven mathematically and scientifically to provide greatly increased stability when the foundation is on suitable bearing material. This is extensively documented since the early 1920’s and now a routine part of engineering practice design."

 

big foot

 

 

 

 

 

 

 

 

 

big foot

   
   
   
   
   
   
   
Table of Contents  
   
   
   

 

COLUMN FORMING SYSTEMS

 

 

 

 

 

 

 

forming and shoring