CONTACT US
ABOUT US
 
 
 
SHORING
FORMING
CHEMICALS
ACCESSORIES
DEPARTMENT INFO
POWER TOOLS
HAND TOOLS
MISCELLANEOUS
ARCH. PAVING SYS.
 
Alisply System Design  
Panels and Fillers    
   
Click pic for more pictures    
 

This metric, modular system consists of a galvanized steel frame and a phenolic resin-coated 15 mm (5/8") plywood face. It provides the strength, durability and finish needed for most gangforming applications.

Alisply has the strength required for the large contact areas and fast pour rates common in large gangform applications. With a design pressure of 6000 kg/m2 (1228.8 psf), only two ties are needed for 3 meter panel heights.
     
     
     
Alisply forms can be used horizontally or vertically, even within the same gang. Available in various widths from 25 to 200 cm, and heights of 1 or 3 meters, this wide range of panel and filler sizes means that you'll be able to form almost any wall dimension. When combined with inside and outside corners and accessories, pilasters, bulkheads and columns can be formed with standard equipment, minimizing costly job-built forming operations.  

Alisply Forming System Alisply: image 2 0f 3 thumb Alisply: image 3 0f 3 thumb

   
Click pic for more detail
     
     
Corners    

Alisply Forming System Click pic for more detail

   Inside and outside corners are available in 1 and 3 meter heights. The inside corners come in three widths: 25cmx25cm, 30cmx30cm and 35cmx35cm (approximately 10"x10", 12"x12" and 14"x14") . They feature the same resin-coated plywood face as the panels and fillers. Outside corners are constructed of galvanized steel.
     
     
 
 
     
Alisply System Components  
     

The Alisply system features clamp connections that eliminate the need for tools and aligning bars. Setting up or changing the configuration of gangs is quick and simple with these innovative attachment clamps.

Other clamp-style forming systems may require several types of specialized clamps even for relatively common applications. Alisply has just two clamps that are used for any forming configuration. This reduces confusion, boosts productivity and simplifies operations.

  
Adjustable Clamp
 
The Adjustable Clamp also requires no tools to install. The large wing nut on the handle adjusts the clamping "jaws" to accommodate lumber fillers up to 25cm (10") wide. Like the Connecting Clamp, the Adjustable Clamp can be used vertically or horizontally to create the exact dimension required.
 
Alisply Adjustable Clamp
 
Click pic for more detail
   
   
 
Manual Clamp
  Attaching and removing the Connecting Clamp requires no tools. A simple lever action opens and closes the "jaws", and a large tension screw is easily adjusted by hand. This clamp is used vertically or horizontally on panels, fillers and corners. Whether side-by-side or stacked, Alisply forms are easy to connect.
 
 
Click pic for more detail
     
Alisply: image 3 0f 3 thumb

Alisply: image 3 0f 3 thumb

 		    
     

 

    
Alisply Ties and Hardware  
     
Heavy Duty Ties    
We offer various heavy duty tie and hardware options to complement the Alisply forming system.    
     
     
     
    She-Bolts
    With the use of a She-Bolt Cone, the same 15 mm diameter rod is used for both the inner and the outer attachment rod. The inner tie is always 4 inches shorter than the wall thickness to work in combination with the length of the She-Bolt Cone.
     
     
     
Adjustable Top Tie    
The Adjustable Top Tie Bracket, a real time and cost saver, connects opposing panels and simultaneously functions as a spreader. All components are above the form and concrete placement, making the entire assembly reusable.    
     
     
     
    Taper Ties
   

The reusable Taper Tie is tapered from 5/8" diameter to ¾" diameter with an ultimate capacity of 36,800lbs. Standard Taper Ties are available in a variety of lengths to permit wall thicknesses from 8" to 30".

Taper Ties offer the advantage of using the same diameter nut on both ends, making setting simpler and faster.

Symons Alisply forms and reusable ties combine to create a remarkably strong concrete forming system. The tying system consists of the Thread Bar, a PVC tube with Cone Caps, plate washers and wing nuts.

     
     
     
Thread Bar    
The high strength, weldable and bendable 15mm (5/8") ductile steel bar has a full-length, cold-rolled contour thread. The 2½ threads per inch offers fast installation and stripping. The Thread Bar is available in 20'-0" standard lengths and can be cut to specific project requirements. Field cutting, with Carborundum blades, is easily accomplished without thread damage.    
     
     
     
    PVC Tube and Cone Caps
   

PVC tubes and reusable Cone Caps ensure accurate form spacing and protect the Thread Bar to allow them to be used repeatedly.

Plate washer and wing nut
No walers are needed at tie locations. Plate Washers rest directly on form crossbars, reducing equipment needs and simplifying set-up operations.

The durable, course thread pitch of the tie system makes tie installation and stripping faster because workers need just a few spins of the wing nut to place the tie.

 

 

Alisply Forming System

Click pic for more detailAlisply: Image 1 Of 3 Alisply: image 2 0f 4 thumb

  

The Alisply system is a high-strength concrete forming system designed for fast-paced gangform operations.

Benefits:

  • Clamp-style connections make setting up gangs fast!
  • Unique hardware and accessories are simple to use.
  • Long service life reduces total applied forming costs.
  • Compatible with other Symons forming systems.
Quick Links
Alisply System Design Alisply Ties and Hardware  
- Panels and Fillers - Heavy Duty Ties  
- Corners - She Bolts  
  - Adjustable Top Tie  
Alisply System Components - Taper Ties  
- Adjustable and Manual Clamps - Thread Bar  
  - PVC Tube and Cone Caps  
   


ALISPLY FORMING SYSTEM

 

 

 

 

 

 

 

forming and shoring