(High-Flow Precision Grout)

Ultra-Purpose is a non-shrink, nonmetallic construction grout for precision applications. This material provides exceptional compressive strengths at a fluid consistency and can be pumped into small spaces not accessible by conventional grouting methods. Ultra-Purpose meets the ASTM-C-1107 specification for grouts.
MSDS    Tech. Data

(High-Performance Grout)

Multi-Purpose is a non-shrink, nonmetallic construction grout. It is easily mixed at recommended water levels for structural grouting with excellent compressive strength. Good flow characteristics and workability make it ideal for bearing plates, column bases, equipment pads and crane rails. Multi-Purpose meets the ASTM-C-1107 specification for grouts.
MSDS    Tech. Data

(Non-Metallic Grout)

General-Purpose is an economical non-shrink construction grout with good physical properties. The compressive strength is adequate for many grouting applications. General-Purpose does not contain any iron, chloride or gypsum material that could be detrimental to product performance. General-Purpose meets the ASTM-C-1107 specification for grouts.
MSDS    Tech. Data

Sure-Grip High Flow Epoxy Grout is a matched system of blended aggregates and premeasured 100% solids, very low exotherm epoxy resin. When mixed, the result is a nonshrink grout for supporting pumps, compressors, rotary equipment and other heavy machinery requiring a stable and energy absorbing base to maintain precision alignment. Sure-Grip High Flow Epoxy Grout may be poured 1" to 24" (2.54cm to 60.1cm) deep in a single pour and will result in a 95% bearing area when properly installed. Sure-Grip High Flow Epoxy Grout is user friendly and has excellent flow and long pot life.

Technical Data Sheet

MSDS Part A
MSDS Part B
MSDS Part C

1107 Advantage Grout is a non-shrink, non-corrosive, non-metallic grout. It is formulated as a cement based product with high quality raw materials. 1107 Advantage Grout offers pumpability, heat and thermal shock resistance and provides controlled, net positive expansion.

Technical Data Sheet

MSDS

TammsGrout Supreme  is  a heavy duty, high early strength, nonshrink, nonstaining, ready-to-use grout. The multiflow characteristic enables this  single  product  to  be  packed,  rodded,  vibrated, poured, or pumped. TammsGrout Supreme has high flexural and compressive strengths, and it is non- metallic, nonrusting, noncorrosive, and non-gas-form-ing.

Tech. Data

HORN NON-CORROSIVE NON- SHRINK GROUT is  a  nonshrink,  nonstaining,  ready- to-use, high early strength grout. Its multi-flow quality allows this product to be used at various consistencies including   pumping   into   inaccessible   areas.   HORN NON-CORROSIVE NON-SHRINK GROUT   may   be packed, rodded, vibrated, poured or pumped. It has high compressive  and  flexural  strengths  and  is  non-rusting and non-corrosive.

Tech. Data

Sonogrout® 10K is Portland-cement-based, shrinkage-compensated high-strength grout that conforms to Corps of Engineers CRD-C-621-83 and ASTM C 1107. Its nonmetallic formula does not rust, bleed, or harm metals on contact. Its cost-effectiveness makes it ideal for large jobs.

MSDS (pdf)
Product Data Sheet (pdf)

SikaGrout 212 is a non-shrink, cementitious grout with a unique 2-stage shrinkage compensating mechanism. It is non-metallic and contains no chloride. With a special blend of shrinkage-reducing and plasticizing/water-reducing agents, SikaGrout 212 compensates for shrinkage in both the plastic and hardened states. A structural grout, SikaGrout 212 provides the advantage of multiple fluidity with a single component. SikaGrout 212 meets Corps of Engineers’ Specification CRD C-621 and ASTM C-1107 (Grade C).

MSDS (pdf)
Product Data Sheet (pdf)