(Flowable Epoxy Joint Filler)
ResCon Semi-Rigid Joint Filler is a two-component, epoxy material designed in a grey color for concrete joints. Joints properly prepared and filled with this material are watertight, chemically resistant and semi-rigid. These features protect the joint and support the industrial floor traffic crossing over the joint.

MSDS Part A    MSDS Part B    Tech. Data

Primer 733 is a quick-drying solvent-based primer for priming joints and substrates before applicati

on of Sonolastic NP 1, TX 1, NP 2, Ultra, SL 1, SL 2, and Sonolastic 150 series sealants. Primer 766 is a high-solids, low-VOC solvent-based primer for priming joints and substrates before application of Sonolastic NP 1, TX 1, NP 2, and Ultra sealants.

MSDS - Primer 733 (pdf)
Product Data Sheet (pdf)

Sonolastic Closed-Cell Backer-Rod is a closed-cell, polyethylene foam joint-filler and backing for elastomeric sealants. Its resilience accommodates dynamic joints. Sonolastic® Soft Backer-Rod is a reticulated closed-cell polyethylene foam joint-filler and backing for sealants. It compresses easily to accommodating joints of varying widths.

Product Data Sheet (pdf)

Sikaflex-1a is a premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant. Meets Federal specification TT-S-00230C, Type II, Class A. Meets ASTM C-920, Type S, Grade NS, Class 25, use T, NT, O, M, G, I; Canadian standard CAN/CGSB 19.13-M87.

Tech. Data

Sikaflex-2c SL is a 2-component, premium-grade, polyurethane-based, elastomeric sealant. It is principally a chemical cure in a self-leveling consistency. Meets ASTM C-920, Type M, Grade P, Class 25, use T, NT, M, G, A, O, I and Federal Specification TT-S-00227E, Type I, Class A

Tech. Data

Sikaflex-1C SL is a single component, self-leveling, premium-grade polyurethane sealant with an accelerated curing capacity. Meets Federal Specification TT-S-00230C, Type 1, Class A. Meets ASTM C-920, Type S, Grade P, Class 25, use T, NT, M, O, G, I.

Tech. Data

Sikaflex-15 LM is a low-modulus, high-performance, 1-component, polyurethane-based, non-sag elastomeric sealant. Meets Federal Specification TT-S-00230C, Type II, Class A; ASTM C-920, Type S, Grade NS, Class 25, use T, NT, G, M; Federal Specification for silicones - TT-S-001543 A, Type non-sag. Tested in accordance with ASTM C-1382 for use in EIFS Systems.

Tech. Data

Thoro Primer 800 is a ready-to-use, film-forming, re-emulsifying PVA-resin sealer and bonding agent for Thoro underlayments. Used over precast and cast-in-past concrete, wood, and plywood, it reduces substrate porosity and promotes adhesion of the underlayment. It contains no VOCs and has low odor.

MSDS (pdf)
Product Data Sheet (pdf)