Dayton/Richmond She-Bolts are high strength units suitable for heavy concrete construction. Manufactured with either Acme or Coil external threads, they provide a positive system for use with gang and/or steel forms. She-Bolts are used in conjuction with inside tie rods.

Product Documentation:
D-2 and D-30 She-Bolts

Dayton/Richmond D-1 and D-18 Inside Tie Rods for She-Bolts are manufactured in three styles: plain, with flats and continuous thread. Positive stops and/or water-resistant models are available.

Inside tie rods are used with she-bolts to provide a highly adaptable forming system. The inside tie rods are made from high carbon steel with coil threads. National coarse threads can be provided on special order.
The correct inside tie rod length is determined by subtracting the total required setback (both sides) from the wall thickness. Flats are available to prevent turning of the inside tie rods in the concrete and are recommended for wall thickness of 24" or less.

Product Documentation:
D-1 and D-18 Inside Tie Rods

Dayton/Richmond D-9 and D-19 Taper Ties are used where specifications permit complete removal of the form tie from the concrete. They are manufactured with either Acme or coil thread and with up to 75" of taper.

Product Documentation:
D-9 Taper Ties

Dayton/Richmond D-9 and D-19 Taper Ties are used where specifications permit complete removal of the form tie from the concrete. They are manufactured with either Acme or coil thread and with up to 75" of taper.

Product Documentation:
D-19 Krueper Taper Tie

Dayton/Richmond B-42 Batter Washers are designed to swing freely to any desired angle up to 45°. they are available in 1/2" through 1-5/8" diameters. Nail holes permit nailing to the waler and multiple grips on the underside help prevent slippage.

Product Documentation:
B-42 Batter Washer

Dayton/Richmond B-27 and D-6 Nut Washers are one-piece ductile steel designs combining the washer and nut in a single unit. Nail Holes are provided to secure the washer to the formwork. B-27 Nut Washers are furnished with coil thread in 1/2" through 1" diameters for use with any coil thread device. The D-6 Nut Washer has 3/4" Acme thread and is used with the D-2 She-Bolt.

Product Documentation:
B-27 Coil Nut Washer

Dayton/Richmond D-101 through D-104 Dowel-Ins are manufactured from grade 60 rebar material and are available in sizes #4 through #11 for use with the DB-SAE Splicer. Dowel-Ins are available in straight, 90° hooked, 180° hooked and double-ended configurations.

Product Documentation:
D-101 Through D-104 Dowel-In

Dayton/Richmond B-42 Batter Washers are designed to swing freely to any desired angle up to 45°. they are available in 1/2" through 1-5/8" diameters. Nail holes permit nailing to the waler and multiple grips on the underside help prevent slippage.

The B-42 Batter Washer is available in the sizes displayed in the accompanying chart. The B-42 washer is designed to swing freely to any desired angle up to 45°. Nail holes permit nailing to the wales, if desired. Multiple lumber grips on the underside prevent slippage when the unit
is not nailed.

Product Documentation:
B-42 Batter Washer